P-GQ FUEL DISPENSER

P-GQ FUEL DISPENSER

FlowMeter Type :Optional

Accuracy :±0.2%

Pressure Loss (kg/cm):Under 0.25

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle : Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type : Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter):Type LCD and Bright Backlight

Digit of Volume :0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range: 0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose :4.5m

Weight :205kg

Dimension(L×W×H) : 1060*550*1620(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 44 20ft: 22

te of Diagram 2-18d after rounding 90 degree. Diagram 2-18d: it is the continuation of the state showed in the diagram 2-18c. Nylon wheel rotates clockwise, and come to the state of Diagram 2-18a after rounding 90 degree. The four pistons discharge out a certain oil under different oil pressure, meanwhile, nylon wheel drive export axis round. Each rotation of export axis means a working circulation. Discharge adjustment The cubage of oil discharged by measurement transducer depends upon the moving distance and cross section of piston according to the working principal. The moving distance of piston is twice as many as of connecting board. Thus, the oil cubage discharged in a circulation can be showed in the following formula: Vaca = π(d/2)2×2L×4=2πd2L (2--2) Vaca──Academic discharge in a circulation; d──Diameter of piston; L──The center of connecting board The formula of 2-2 is an ideal discharge volume. But there are many elements affecting discharge, including the centre distance of connecting board, diameter tolerance be fuel dispenser tween piston and bushing, inconsistent clearance between piston and cylinder, different oil viscosity under various temperature, different fluid fluctuation in varied hydraulic system, and measurement transducer variable loan. Thereby, the real discharge is: V real = V ac �△V (2-3) V real ── Real discharge; V ac ──Academic discharge; V�──Dispersion of academic discharge and real discharge . In order to make the real discharge near to the academic one and ensure keeping the stable and correct relation between the real discharge and export axis, rational design, high machining accuracy and necessary adjustment are needed. The fuel dispenser adjusting device mounts two regulative pistons installed in a pair of piston. They are connected with a rod, moving along with pistons until near to furthest point and hit the bolt of adjusting cover. But piston still move, its room substituted by fuel dispenser

answer message with the respective Data_Id data length set to 0.　　Where a proprietary pump protocol doesn t supply the data needed in the IFSF database the　　PCD should make every attempt to generate the missing data.　　6.6 Known Limitations　　It needs to be stated that a PCD can translate the proprietary pump protocols to the IFSF　　Dispenser Application protocol but will not be able to:　　 Change measurement or transaction data received from the proprietary pump. The data　　 accuracy is the responsibility of the dispenserpump.　　 Support some functions when the proprietary dispenser doesn t have the hardware to　　March 2006 IFSF - STANDARD FORECOURT PROTOCOL FP31_2.23　　 DISPENSER APPLICATION　　 Page: 139　　 support them i.e. where no slow flow valves are present to allow the dispenser to accurately　　 stop the delivery on a supplied volume fuel dispenser or amount limit.　　Where a PCD can not support a function that can be supported by a native IFSF compatible　　device the PCD supplier must document this shortcomings so that customers are aware of it.　　FP31_2.23 IFSF - STANDARD FORECOURT PROTOCOL March 2006　　 DISPENSER APPLICATION　　INTERNATIONAL FORECOURT STANDARDS FORUM　　 STANDARD FORECOURT PROTOCOL　　 PART III.II　　 PRICE POLE APPLICATION　　 VERSION 1.12 - JANUARY 2003　　Page: 2　　This document is written by the IFSF - Working Group:　　 Name Company fuel dispenser Telephone　　 IFSF Technical Services　　 Gwyn Williams +441513472225　　 Eduardo Rezende Formally: fuel dispenser

st-era toilet paper. But that is roughly the slogan that the EU is now adopting. Its latest intellectual fad is the notion of “absorption capacity� a label for its supposed (in)ability to take in new members. The European Commission gave the idea its imprimatur last November. At their recent summit, Europe s heads of governments instructed the commission to draw up a report on how much absorption capacity there is. After all, the club cannot go on taking in new candidates without any regard to public opinion or their impact on current members. Yet this sudden burst of interest in such a vague idea is worrying. Not only has nobody sought to define the concept, but it could prove misleading, dishonest and damaging. The term first cropped up in 1993, at a time when former communist countries from central Europe were clamouring at the doors. A summit in Copenhagen laid down the terms of entry for these and other would-be members the so-called Copenhagen criteria. Among other things, these decreed that “membership requires that the candidate country has fuel dispenser achieved stability of institutions guaranteeing democracy, the rule of law, human rights� But along with the criteria was a further declaration that “the union s capacity to absorb new members...is also an important consideration in the general interest of both the union and the candidate countries.� The distinction between a formal “criterion�and a mere “consideration�sounds abstruse and semantic, but in practice it has been vital to the EU s recent expansion. If applicant countries meet the Copenhagen criteria, they are admitted. It is their readiness that matters; the union s capacity to absorb them is secondary, as befits a mere consideration. Ostensibly, this has not c fuel dispenser hanged. The summit s president, Austria s Wolfgang Schüssel, confirmed that absorption capacity had not been upgraded. The president of the commission, José Manuel Barroso, spelled this out further. “This is not a new criterion—I repeat, not fuel dispenser