U104-B 3-phase Connection

U104-B 3-phase Connection

This type of meter is used to fuel dispensers for measurement of pressurized oil.

Materials:

Body: Aluminum (Spray-Painted)

Package:

Net Weight:

1.7kg/case of 1

Gross Weight: 1.9kg/case of 1

Dimension: 36x15x15cm/case of 1

mospheric pressure. If v1is certain, the less A2 / A1 the much v2, which are got from Formulae 2-7 and 2-8. Automatic shut is depended upon fluid pressure. When inlet vent is flooded by oil, membrane is moved upward because of negative pressure on upper membrane. In that state, main valve is closed under the function of switch handle. In order to ensure auto-shut performance, the section of vice valve passage is generally smaller, pressure loss being larger. Therefore, the flow of aut fuel dispenser o-shut nozzle is smaller than that of general nozzle in filling process. Because the vent of auto-shut is communicated with atmosphere in filling operation, splashing oil may lead to switch off of nozzle, especially in smaller tank. Customer should select appropriate auto-shut nozzle to refuel. Usage and Maintenance During operation light put up and down auto-shut nozzle, regularly add lubricating oil on top level of main valve, ensuring that flexible manipulation. Promptly replace invalid components. Pay much attention to passage of auto-shut nozzle, preventing waste jam passages and auto-shut function lost. Although auto-shut nozzle will be closed when container is full, filling person should not leave fuel dispenser in case of accident. The failure and troubleshooting of auto-shut nozzle as followed: Table 2-2: auto-shut nozzle failure and troubleshooting Failure Reason(s) Troubleshooting Inflexible auto-shut Waste between membrane and auto control level Open side cover and clean membrane; Disassemble low spout and clean waste Over flexible Waste in air-vent of vice valve Disconnect spout and clean air vent Leakage on top level O-ring is invalid Replace No delivery Vice valve is stuck Disconnect spout and examine vice valve, clean waste and burr Incomplete close Vice valve is stuck Disconnect spout and examine vice valve, clean waste and burr Leakage from close nozzle Main valve overweared or is stuck Disassemble main valve and replace gasket or clean waste Article V Oil indicator Oil in fuel dispenser

cited Data Message without Acknowledge　　 M_St　　 bit 8 bit 7 bit 6 bit 5 to 1 Description　　 0 0 0 token 0 - 31 Read Message　　 0 0 1 Answer Message　　 0 1 0 Write Message　　 0 1 1 Unsolicited Data Message with Acknowledge　　 1 0 0 fuel dispenser Unsolicited Data Message without Acknowledge　　 1 1 1 Acknowledge Message　　 The token is used by the message originator to be able to make the link between a　　 received message and a message previously sent (question command ...). The token　　 value is chosen by the originator and returned by the recipient without any processing　　 so the originator can always use the same token (if it doesnt need to use this link) or　　 different value for each message.　　 A token is generated for all message types except an ANSWER or an　　 ACKNOWLEDGE. These two types merely return the token they re fuel dispenser ceived in the　　 message to which they are response.　　3.2.2 Message Length M_Lg　　 The Message Length M_Lg is used to specify the number of bytes that follow in the　　 message fields:　　 - Database Address Length DB_Ad_Lg　　 - Database Address DB_Ad　　 - Application Data Data　　 The Message Length is specified in two bytes (bin16).　　3.2.3 Database Address DB_Ad and Length DB_Ad_Lg　　 Every data element in a device is stored in a database. In some implementations it may　　 be real database or only a software organisation (object or tasks) for instance if a　　 separate processor manages each meter. So the addressing mode must be flexible　　 enou fuel dispenser

inister, paid her first visit to India after more than four years in office. Both sides made efforts to mend their habitually prickly relationship. Yet India still doubts the sincerity of Bangladesh s crackdown; and many other gripes still strain the two countries relations. In recent months, Bangladesh has suffered many acts of terrorism, which have been blamed on Islamist extremists and claimed at least 30 lives. Last August, in perhaps the most meticulously co-ordinated terroris fuel dispenser t operation ever, some 500 tiny bombs were detonated in 63 of Bangladesh s 64 districts over the course of about an hour. A group called the Jamatul Mujahideen Bangladesh (JMB) claimed responsibility for the blasts. The most visible sign of the government s tough new approach was its arrest this month of the leader of the JMB, and of Siddiqul Islam, leader of a group called Jagrata Muslim Janata Bangladesh (JMJB). JMJB had waged a campaign of torture and killing against radical left-wing groups in the north-west of the country. The government says it has captured around 800 JMB members, including five of the seven members of its ruling council, and that it has charged them with sedition. In addition, the c fuel dispenser ourts have so far sentenced 22 bombers to death. Previously, the governing coalition dominated by Ms Zia s Bangladesh Nationalist Party (BNP) denied that these groups even existed, inviting suspicions that it was somehow complicit in their activities. After all, the BNP relies on the support of two Islamist parties, the Jamaat-e-Islami and the Islami Oikyo Jote, and will do so again in general elections due by next January. Some of the rounded-up militants emerged from these parties student wings. But now the government argues that it has more or less dealt with the terrorists. There have been no new attacks reported since a string of suicide bombings last December. In Delhi, Ms Zia agreed with Manmohan Singh, her Indian counterpart, that India and Bangladesh are both victims of terrorism and should join hands t fuel dispenser