U501-C Pulse sensor

U501-C Pulse sensor

This incremental shaft encoder has been designed for heavy-duty application,especially for use in petroleum & diesel dispensing environments where potentially explosive atmospheres can be expected. It features a rugged and compact construction as well as a wide selection of mechanical and electronic variations.

Materials:

Housing: Die cast aluminum alloy

Bearings: Self-lubricating sintered bronze

Features :

A high advantage in reliability and adaptability.

A large selection of shaft couplings, including couplings with built-in backlash clutch facility.

Standard sealing screws.

The fuel resistant cable can be customized regarding length.

Suit the TATSUNO meter and other meters whose pulse per circle is 60 or 100.

100% EX approved and tested.

Specifications:

Power supply: 5 VDC, fixed or variable

Current Consumption: Standard 10 to 30 mA, max 90mA

Number of Channels: 2

Number of pulses: 50 ppr

Output Signal: Square wave duty cycle 50%+10%.

Phase Shift: 2 channels 90° (25% +5%)

Output Stage: NPN

Output Current: Max. 30mA

Hysteresis: Min. 0.2°

Output freq. Min. 1000Hz

Temperature range: Working -40 to 70degree

RPM: Max 3000RPM

Mounting: With 3 pcs. M4 screws

Weight: Approx. 340 gram. Excl. the cable

Wiring:

Color Channel plug

Green +5V 2

Black CH1 3

Yellow 0V 4

Blue CH2 5

Red +5V 6

--- --- 1

Package:

Cross Weight Dimension

150g/case of 1 130x100x15mm/case of 1

Approval:

The shaft encoder has been tested and granted Ex and EMC approval.The Ex-approval is EX d IIA T3.Ex certificate number is CE991209.

Ordering Specifications:

Product ID Product name

U501-C pulse sensor

Important:

The products should be used in compliance with applicable country, province and local Laws and regulations. Products selection should be based on physical Specifications and limitations and compatibility with the environmentand materials to be handled. HONGYANG makes no warranty of fitness for a particular use. All illustrations and Specifications in this literature are based on the latest products information lable at the time of publication,HONGYANG reserves the right to make changes at any time in price, materials. Specifications and models and to discontinue models without notice or obligation.

ate spare parts according to User’s Manual. Keep seal surface clean and flat as disassembly and reassembly. Store O-ring seal in sunproof place without evident temperature change in case of aging. Rubber and asbestos gasket, cork and rubber board and rubber seal In disassembling or reassembling cone-shaped seal structure pays much attention not to hurt or broken sublatae surfaces, cleaning waste. Chapter III Electric control system of fuel dispenser Article I Main functions of electric control system for fuel dispenser Fuel dispenser is operated under electric control, realizing refueling process. Its main function brief as followed: calculation of volume and sales: measuring CPU collect flow data from pulse sensor, and count volume and sales according to certain calculating method. Finally these data display on screen. Pulse sensor inspection: lock fuel dispenser as sensor occur trouble. Starting motor, stop control, switch on and off solenoid valve. Display function: show various filling information on screen Dialogue function: filing staff realize general operation through keyboard, display screen and nozzle switch. Network communication function: all fuel dispenses in network are managed and controlled by centre-control computer. Article II Electric control system configuration of fuel dispenser 1. General structure Diagram 3-1 illustrated single nozzle fuel dispenser, mechanical section showed in broken line ---- also called hydraulic components, yet real line is showing the electric section fuel dispenser (system) of fuel dispenser, including measuring main board, keyboard, display screen, control circuit of motor and solenoid valve, motor, solenoid valve, pulse sensor, nozzle switch, power supply board, junction box of AC current and communication box. Dia fuel dispenser gram 3-1: Structural sketch map of fuel dispenser mounted single nozzle There is little difference between double and single fuel dispenser in electric control system, the former having two sets of display screen, keyboard, a contr fuel dispenser ol of

Date :　　 POS Department　　 9. EXCHANGE PROTOCOL　　 This protocol enables:　　 Establishment of the logical link between applications:　　 management of the maintenance of this link　　 general validation of application messages　　 9.1. Procedure for logical establishment of communications　　 Includes the following issues:　　 Set-up of the logical channels between the corresponding monetics applications　　 synchronisation of application software and applications:　　 �? compatibility check of application software　　 �? consistency check of the paramete fuel dispenser risation between the corresponding monetics　　 applications　　 The following diagram summaris fuel dispenser es the exchanges of this procedure as detailed in the　　 following paragraphs:　　 fuel dispenser

hs of last year, making it the biggest investor after Hong Kong. In October last year, Mr Koizumi appointed an official widely seen as “pro-China�? Toshihiro Nikai, as his trade minister. But China has been refusing to talk to Mr Koizumi since his last visit to the Yasukuni shrine in October. And even when China is talking, the frosty state of relations makes it difficult for the two countries to establish mechanisms for dealing with sudden crises in their relationship. For several hours during last year s anti-Japanese demonstrations in Beijing, nervous Japanese diplomats were unable to reach China s foreign ministry by phone. If a Japanese vessel were to collide with a Chinese one in a disputed area of the East China Sea, causing Chinese casualties, it is easy to imagine an outbreak of violent protests in China that could rapidly escalate. Such risks could grow as Chinese navy vessels become more active in the area. A Chinese submarine was spotted near Okinawa in 2004, and last year China briefly deployed warships near its controversial gas-drilling rigs in the East China Sea. Some Japanese diplomats fret that China s Communist Party may not have full control over the military. So far, however, both China and Japan, while verbally pandering to nationalists in AP their respective countries, have tried to avoid going beyond diplomatic skirmishing. Having let last April s protests run for a few days, the Chinese authorities decided to rein them in, apparently concerned a fuel dispenser bout the risk of a serious breakdown in relations with Japan. In recent weeks China s criticism of Japan has become more muted. Perhaps the Chinese are waiting to see what happens when Mr Koizumi steps down in September. One problem for China is that its fuel dispenser most active nationalists are drawn from the very middle class upon whose support the party depends. Peter Gries of the University of Colorado says that many of those who took part in last year s protests were “savvy urban yuppie fuel dispenser s?