HONGYANG GROUP tokelau Technical Center

Fax: +86 (577)88097280

HONGYANG Group logo

HONGYANG GROUP tokelau Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly

U601 Oil indicator

U601

U601 Oil indicator

U601 series Oil Viewing Device is designed to watch whether the pipes of the fueling machine is full of liquid or not.

Materials:

Body: Brass

Viewing glass: Toughened glass

seals: Buna-N

Surface: electronic Chromium plated

Bearing: Iron ball

Features :

U601 Oil View Device provides a 360°swivel action which can reduce the physical strain

100% Factory Tested.

Package:

Net Weight Cross Weight Dimension

36.5kg/case of 50 40kg/case of 50 27.5x27x33 cm / case of 50

products links

links

technical archives

    fuel dispenser Main frame installation The installation method of submersible pump fuel dispenser is similar to that of suction pump fuel disp fuel dispenser enser. The horizontal distance from main frame to underground tank is no more than 60m, vertical distance no exceeding 4m, delivering pipe with less 0.2% slant, elbow as few as possible. Power supply lead, control line and communicating cable are installed respectively. Main wire pipe adopts 2’�seamless steel pipe, branch 1 1/ fuel dispenser 2 ‘� Pressure testing of pipe should be conducted strictly in accordance with stipulation of GB50156 because the working pressure of submersible pump is 0.25~~0.3Mpa, even 0.63Mpa in instance. Safety valve should be installed in submersible pump fuel dispenser, connecting pipe with stainless steel corrugated pipe. It should be installed at the angel iron fixed in concrete, connecting with pipe. (Illustrated in Diagram 5-11) 1.1 Electric installation Electric installation includes power supply installation and connection of fuel dispenser with junction box assembly. 1: Oil filter end 2: Gasket 3: Check valve 4: Pipe 5: Safety valve 6: U-shape bracket 7: Angle iron 8: Upper flange 9: Corrugated pipe 10: Low flange Diagram 5-11: Inlet connection sketch map of fuel dispenser Power supply installation (referen fuel dispenser ce to Diagram 5-12): adopting oil-resistance and erosive resistance three threads copper cable, section no less than 1mm2, outside diameter about 8mmm. User’s lines and signal cable are connected into explosion-proof junction box. 1.2 Junction box installation There are many items installed in Junction box, including terminal, power breaker (switchers of power and fuel dispensers), touch-switch, hot protection relay, general relay controlled by low voltage, signal terminal and control board of submersible pump. Other installations should be conducted strictly in accordance with electric control drawing. 1.3 Submersible pump installation Submersible pump is delivering equipment with positive pressure, which

technical specification

    Neuron chip configured as (S6:N1) the Transmitting Neuron chip will transmit at   network level to the OPT device (S6:N1) but in t fuel dispenser he application message will use a   Recipient Subnet address of 4 and a Recipient Node address of 1.   Where: S4:N4 = S4 is Subnet 4   N1 is Node 4.   It is therefore up to the application layer to decipher the incoming message and then   fuel dispenser route the data to its respective device.  4.2 Application Protocol Parameters   - Block Length:   The Block Length is set by the Max_Block_Length communication data element.   The range for the block length is 32 to 228. To allow messages longer than this value   a Block Number BL is included in the message.   The preferred range for the Block Length is 32 to 228 but it is recognised sometimes   this is not practical. Therefore it is acceptable to implement a maximum Block Length   smaller than 228. The minimum acceptable Block Length range is 32 to 64.  February 2006 IFSF - STANDARD FORECOURT PROTOCOL FP2_1.90   COMMUNICATION SPECIFICATION   fuel dispenser Page: 27   - Communication Services   All messages are point to point with acknowledge. If a message doesnt receive an   acknowledge after the given number of retries this is reported to the application   which can take the decision (repeat cancel state change ...).  4.3 Messages Code IFSF_MC   The IFSF message code (IFSF_MC) can be used by the receiving device to easily   filter received data.   Please note that the LONTALK Message code should always have the same value as  

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    population were “readers not buyers�of the papers, reading in “club rooms, taverns and coffee houses� Adult illiteracy was not a huge barrier t fuel dispenser o the spread of news because literate men were expected to read papers aloud to those who were not—often in the congenial premises of the local tavern. Richard Rush, the American envoy in London, noticed that newspapers were circulated by agents at 1d an hour in London. After a few days they would be sent to provincial towns fuel dispenser . He thought it took three days for the London papers to reach every part of Britain. An analyst writing in the Westminster Review in 1829 thought that every London paper was read by 30 people, and put the national average at 25. Even if the figure were half that, Britain was evidently a greedy consumer of news. The news from the London papers would arrive in provincial towns in the morning by coach, and be quickly copied into local papers. Bristol had five papers, Bath four, Canterbury three, Liverpool six, Manchester seven, Glasgow four and Edinburgh nine. Sunday papers were also thriving. On one Sunday during the queen s trial the anti-slavery campaigner William Wilberforce was able to buy 19 different newspapers. The London Sunday papers, and the placards that announced their contents, arrived soon after midday in fuel dispenser Brighton. Read all about it The next stage of the news-chain was inhabited by William Hone, William Cobbett and other printers of mass-circulation pamphlets and squibs that sold for 6d. In the days before the trial Cobbett published a single-page open “Letter from the Queen to the King�that set down Caroline s grievances. Cobbett later claimed that 2m copies were printed in Britain and nearly half a million in America. He probably exaggerated, but the “Letter�certainly sold hundreds of thousands of copies. Hone and Cruikshank published a squib called “The Queen s Matrimonial Ladder� describing 14 stages of the royal marriage. It was a tirade against the king, lambasting him for his